When the maintenance and repair of the car there will inevitably be some errors,usually when the Internet, as much as possible to see this information, and not toremember the maintenance process, can avoid detours. Let your car healthpreservation. Today Xiaobian introduce four point maintenance not.
1 don't like wheel bolt and nut oil the wheel repair, a handful of private car owners in order to prevent the wheel bolt and nut rust, installation will create new styles of bolts and nuts are coated with a lubricant, but this approach not only wrong, but also for traffic safety will bring risks. Bolt and nut, having the characteristics of self-lockingbetween. And coated with lubricating oil, the self-locking coefficient between the twovariable filial piety self-locking performance. In the car at high speed, very easy to loose bolts and nuts and even fall off, causing traffic accidents.
2 do not wash with water body internal to the summer, common side of private car owners who wash the body of water, the side with the dishcloth, private car owners would like to remind is: body interior is best not to wash water directly. Because the pad underneath the cab floor can not be "Yimapingchuan, need the structure of thegroove, driving below room floor pad vias very much. After washing with water, or deposited in the groove is not easy to dry, or rust flow to the gearbox and other partsfrom the through hole. Especially good sealing performance car cannot flush water directly body interior. The correct way is to wipe with a wet cloth, but avoid seeper.
Coolant not 3 different brands of mixed use who knows the engine cooling fluid should be added in time, but if you put a different brand of coolant temperature with it? If it is,or persuade you as early as possible to the coolant discharged, coolant and re addthe same brand. Because the cooling liquid of different brands of its chemical properties may vary disparities, such as black metal effective preservatives, but oftenhave a corrosive effect on aluminum products; and is suitable for the aluminum alloypreservatives are harmful to the iron alloy. Because the cooling liquid of different brands with different preservatives, so cannot be mixed.
4 EFI car starts not to step on the gas before starting the engine throttle is stepped onseveral feet, the habit of many drivers, especially in the winter cold starts. But this method does not start the car for efi. With the electronic control fuel injection enginewith common carburetor engine is different, its fuel injection control device canautomatically adjust the fuel according to the engine temperature, working conditions,make the engine start smoothly, namely in the cold start, fuel injection control devicecan automatically increase the fuel supply quantity. Therefore, the EFI car engine is started, there is no need to step on the gas, the more don't before starting continuousto hurry on, otherwise it makes engine start bad.
